- 题名/责任者:
- Characterization of Minerals, Metals, and Materials 2018 edited by Bowen Li, Jian Li, Shadia Ikhmayies, Mingming Zhang, Yunus Eren Kalay, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Andrew Brown, Chenguang Bai, Zhiwei Peng, Juan P. Escobedo-Diaz, Ramasis Goswami, Jeongguk Kim.
- 版本说明:
- 1st ed. 2018.
- 出版发行项:
- Cham : Springer International Publishing : Imprint: Springer, 2018.
- ISBN:
- 9783319724843
- 其它标准号:
- 10.1007/978-3-319-72484-3
- 载体形态项:
- XXX, 731 p. 400 illus. online resource.
- 主文献:
- Springer eBooks
- 其他载体形态:
- Printed edition: 9783319724836
- 其他载体形态:
- Printed edition: 9783319724850
- 其他载体形态:
- Printed edition: 9783319891866
- 丛编说明:
- The Minerals, Metals & Materials Series, 2367-1181
- 附加个人名称:
- Li, Bowen. editor.
- 附加个人名称:
- Li, Jian. editor.
- 附加个人名称:
- Ikhmayies, Shadia. editor.
- 附加个人名称:
- Zhang, Mingming. editor.
- 附加个人名称:
- Kalay, Yunus Eren. editor.
- 附加个人名称:
- Carpenter, John S. editor.
- 附加个人名称:
- Hwang, Jiann-Yang. editor.
- 附加个人名称:
- Monteiro, Sergio Neves. editor.
- 附加个人名称:
- Firrao, Donato. editor.
- 附加个人名称:
- Brown, Andrew. editor.
- 附加个人名称:
- Bai, Chenguang. editor.
- 附加个人名称:
- Peng, Zhiwei. editor.
- 附加个人名称:
- Escobedo-Diaz, Juan P. editor.
- 附加个人名称:
- Goswami, Ramasis. editor.
- 附加个人名称:
- Kim, Jeongguk. editor.
- 附加团体名称:
- SpringerLink (Online service)
- 论题主题:
- Materials science.
- 论题主题:
- Structural materials.
- 论题主题:
- Engineering—Materials.
- 论题主题:
- Structural Materials.
- 论题主题:
- Materials Engineering.
- 内容附注:
- Part 1. Characterization Methods -- On FIB Milling Parameters -- Part 2. Characterization of Ceramics -- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag -- In-situ XRD Investigation of Bauxite Dehydroxylation -- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery -- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production -- Part 3. Characterization of Non-ferrous Metals -- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery -- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature -- Part 4. Microstructure and Performance of Materials -- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina -- Part 5. Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. Analysis of Surfaces and Interfaces -- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces -- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method -- Intergranular Cracking of High Strength Alloyed Brass Rods -- Part 8. Mechanical Behaviors of Materials -- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining -- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel -- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets -- Part 9. Characterization of Powder Materials -- Characterization of HPGR Pre-treated Sinter Feed -- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite -- Study on Application of Iron Ore Fine in Pelletizing -- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts -- Part 10. Mineral Processing and Analysis -- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India -- Humic Acid-based Silica Composite Aerogels--A Preliminary Study -- Characterization of Non-covalently Functionalized Halloysite -- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria -- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay -- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation -- Part 11. Nanostructure and Characterization of Materials -- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption -- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites -- Part 12. The
- 摘要附注:
- This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.
全部MARC细节信息>>